Test Kits

From TripSit wiki
Revision as of 18:01, 24 January 2023 by Trees (talk | contribs) (Added EU reagent vendor ProTestKit as suggested by user Standard)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The vast majority of synthetic drugs are white powders. A reagent test kit is the only way you can safely attempt to verify the identity of a substance without expensive and complicated lab equipment. This article is an introduction to the various kinds of common test kits including a variety of worldwide sources. It should be noted that these test kits cannot measure the purity of a drug, only its presence. If you've got more than one drug in a powder, it's possible that a reagent test may show the presence of only one of the drugs.

A color change reference chart for the four main reagents can be found at Dancesafe (Imgur mirror). Erowid.org also has a great Ecstasy Testing Kit FAQ. United Nations Office on Drugs and Crime Field and laboratory tests results for raw and prepared opium.

Note: Check out This article by DanceSafe about properly using Fentanyl Test Strips! Many well intending people have been using fentanyl test strips incorrectly.

Marquis Reagent

Marquis' reagent is used as a simple spot-test to presumptively identify alkaloids as well as other compounds. It is composed of a mixture of formaldehyde and concentrated sulfuric acid, which is dripped onto the substance being tested. The United States Department of Justice method for producing the reagent is the addition of 100 mL of concentrated (95–98%) sulfuric acid to 5 mL of 40% formaldehyde.

Canada

Europe

USA

Mandelin Reagent

The Mandelin reagent is used as a simple spot-test to presumptively identify alkaloids as well as other compounds. It is composed of a mixture of ammonium metavanadate and concentrated sulfuric acid. Its primary use is for the detection of ketamine and PMA. The United States Department of Justice method for producing the reagent is the addition of 100 mL of concentrated (95–98%) sulfuric acid to 1 g of ammonium vanadate.

Canada

Europe

USA

Mecke Reagent

The Mecke reagent is used as a simple spot-test to presumptively identify alkaloids as well as other compounds. It is composed of a mixture of selenious acid and concentrated sulfuric acid, which is dripped onto the substance being tested. The United States Department of Justice method for producing the reagent is the addition of 100 mL of concentrated (95-98%) sulfuric acid to 1 g of selenious acid.

Canada

Europe

USA

Ehrlich's Reagent

The Ehrlich's reagent is used as a simple spot-test to presumptively identify alkaloids. It is prepared by dissolving 0.5-2.0 g of p–dimethylaminobenzaldehyde (DMAB) in 50 mL of 95% ethanol and 50 mL of concentrated hydrochloric acid. It is best prepared fresh.

Europe

Canada

USA

Other

Australia

Canada

  • Marquis, Mandelin, Mecke 3-in-1: TestKitPlus
  • Froehde, Simon's Reagent A & B, Ferric Chloride: QKTest

Europe

USA